Alco / Emerson

The 240RA is a 2-way, normally closed diaphragm valve. 240RA valves are used for liquid, suction, and hot gas service.

Features

• One coil fits all valve sizes

• Can be brazed into the line without disassembly

• PTFE diaphragm for high temperature applications

• Extended ends for easy installation (standard)

• Long-life molded coils

• Mounting stud models can be field converted to manual stem

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 500 psig

• MOPD: 300 psig • UL/CUL file number: MP604

NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

Options • Manual stem or mounting stud

The 240RA is a 2-way, normally closed diaphragm valve. 240RA valves are used for liquid, suction, and hot gas service.

Features

• One coil fits all valve sizes

• Can be brazed into the line without disassembly

• PTFE diaphragm for high temperature applications

• Extended ends for easy installation (standard)

• Long-life molded coils

• Mounting stud models can be field converted to manual stem

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 500 psig

• MOPD: 300 psig • UL/CUL file number: MP604

NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

Options • Manual stem or mounting stud

The 240RA is a 2-way, normally closed diaphragm valve. 240RA valves are used for liquid, suction, and hot gas service.

Features

• One coil fits all valve sizes

• Can be brazed into the line without disassembly

• PTFE diaphragm for high temperature applications

• Extended ends for easy installation (standard)

• Long-life molded coils

• Mounting stud models can be field converted to manual stem

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 500 psig

• MOPD: 300 psig • UL/CUL file number: MP604

NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

Options • Manual stem or mounting stud

The 200RB is a pilot-operated, 2-way, normally closed valve. 200RB valves are used for liquid, discharge, or suction gas refrigerant service.

Features

• All coils fit all solenoid valves

• Extended ends for easy installation (standard)

• Long-life molded coils

• PTFE O-ring for superior external sealing

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 680 psig

• Minimum operating pressure drop: 2 psi

• MOPD: 300 psig • UL/CUL file number: MP604 NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

NOTE: MOPD based on AC application. Consult application engineer for DC application.

Options • Available in 7 port sizes

• Manual stem or mounting stud

• Bi-Flow operation-conversion either factory assembled or with kit KS-30377 (except 200RB 7 & 9)

The 200RB is a pilot-operated, 2-way, normally closed valve. 200RB valves are used for liquid, discharge, or suction gas refrigerant service.

Features

• All coils fit all solenoid valves

• Extended ends for easy installation (standard)

• Long-life molded coils

• PTFE O-ring for superior external sealing

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 680 psig

• Minimum operating pressure drop: 2 psi

• MOPD: 300 psig • UL/CUL file number: MP604 NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

NOTE: MOPD based on AC application. Consult application engineer for DC application.

Options • Available in 7 port sizes

• Manual stem or mounting stud

• Bi-Flow operation-conversion either factory assembled or with kit KS-30377 (except 200RB 7 & 9)

The 200RB is a pilot-operated, 2-way, normally closed valve. 200RB valves are used for liquid, discharge, or suction gas refrigerant service.

Features

• All coils fit all solenoid valves

• Extended ends for easy installation (standard)

• Long-life molded coils

• PTFE O-ring for superior external sealing

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 680 psig

• Minimum operating pressure drop: 2 psi

• MOPD: 300 psig • UL/CUL file number: MP604 NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

NOTE: MOPD based on AC application. Consult application engineer for DC application.

Options • Available in 7 port sizes

• Manual stem or mounting stud

• Bi-Flow operation-conversion either factory assembled or with kit KS-30377 (except 200RB 7 & 9)

The 200RB is a pilot-operated, 2-way, normally closed valve. 200RB valves are used for liquid, discharge, or suction gas refrigerant service.

Features

• All coils fit all solenoid valves

• Extended ends for easy installation (standard)

• Long-life molded coils

• PTFE O-ring for superior external sealing

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 680 psig

• Minimum operating pressure drop: 2 psi

• MOPD: 300 psig • UL/CUL file number: MP604 NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

NOTE: MOPD based on AC application. Consult application engineer for DC application.

Options • Available in 7 port sizes

• Manual stem or mounting stud

• Bi-Flow operation-conversion either factory assembled or with kit KS-30377 (except 200RB 7 & 9)

The 200RB is a pilot-operated, 2-way, normally closed valve. 200RB valves are used for liquid, discharge, or suction gas refrigerant service.

Features

• All coils fit all solenoid valves

• Extended ends for easy installation (standard)

• Long-life molded coils

• PTFE O-ring for superior external sealing

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 680 psig

• Minimum operating pressure drop: 2 psi

• MOPD: 300 psig • UL/CUL file number: MP604 NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

NOTE: MOPD based on AC application. Consult application engineer for DC application.

Options • Available in 7 port sizes

• Manual stem or mounting stud

• Bi-Flow operation-conversion either factory assembled or with kit KS-30377 (except 200RB 7 & 9)

The 200RB is a pilot-operated, 2-way, normally closed valve. 200RB valves are used for liquid, discharge, or suction gas refrigerant service.

Features

• All coils fit all solenoid valves

• Extended ends for easy installation (standard)

• Long-life molded coils

• PTFE O-ring for superior external sealing

Specification

• Maximum fluid temperature: 250°F

• Maximum working pressure: 680 psig

• Minimum operating pressure drop: 2 psi

• MOPD: 300 psig • UL/CUL file number: MP604 NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended.

NOTE: MOPD based on AC application. Consult application engineer for DC application.

Options • Available in 7 port sizes

• Manual stem or mounting stud

• Bi-Flow operation-conversion either factory assembled or with kit KS-30377 (except 200RB 7 & 9)